Turbo Oil & Coolant Line Kit - Mitsubishi 4G93
A Complete Turbo Oil & Coolant Line Kit includes everything you need in one neat package to fully plumb up an aftermarket turbo install on the Mitsubishi 4G92, 4G93 or 4G94 engines found in Lancer & Mirage
Designed for low mounted GT2871R Turbo or similar, using the common T25 cast exhaust manifold.
Oil Feed line
-1× 4AN Adaptor - M12×1.25
-Straight & 45 degree 4AN Hose Ends & SS Braided PTFE hose
-Tee for Oil Pressure Sensor port, allowing standard sensor to be retained.
(if using an Oil Pressure Gauge, an adaptor fitting can be added to allow the extra sensor to be installed.): Link
Oil Drain / Return Hose
-90 & 45 Degree -10AN Hose Ends & SS Braided hose
-2 bolt Flange suits GT, and G series Turbos
-Weld-on Fitting for oil pan - Stainless Steel -10AN
Coolant Lines
-2x -6AN Adaptors - M14×1.5
-2x -6AN 90 degree Hose Ends
-Black Nylon-covered Braided hose with hex end finisher clamps.
Length of hose is long enough to connect into throttle body heater hose circuit (retaining throttle body heating) or trim them slightly to fit directly into the Heater Pipes instead.
INSTALLED PICS COMING SOON
A Complete Turbo Oil & Coolant Line Kit includes everything you need in one neat package to fully plumb up an aftermarket turbo install on the Mitsubishi 4G92, 4G93 or 4G94 engines found in Lancer & Mirage
Designed for low mounted GT2871R Turbo or similar, using the common T25 cast exhaust manifold.
Oil Feed line
-1× 4AN Adaptor - M12×1.25
-Straight & 45 degree 4AN Hose Ends & SS Braided PTFE hose
-Tee for Oil Pressure Sensor port, allowing standard sensor to be retained.
(if using an Oil Pressure Gauge, an adaptor fitting can be added to allow the extra sensor to be installed.): Link
Oil Drain / Return Hose
-90 & 45 Degree -10AN Hose Ends & SS Braided hose
-2 bolt Flange suits GT, and G series Turbos
-Weld-on Fitting for oil pan - Stainless Steel -10AN
Coolant Lines
-2x -6AN Adaptors - M14×1.5
-2x -6AN 90 degree Hose Ends
-Black Nylon-covered Braided hose with hex end finisher clamps.
Length of hose is long enough to connect into throttle body heater hose circuit (retaining throttle body heating) or trim them slightly to fit directly into the Heater Pipes instead.
INSTALLED PICS COMING SOON
A Complete Turbo Oil & Coolant Line Kit includes everything you need in one neat package to fully plumb up an aftermarket turbo install on the Mitsubishi 4G92, 4G93 or 4G94 engines found in Lancer & Mirage
Designed for low mounted GT2871R Turbo or similar, using the common T25 cast exhaust manifold.
Oil Feed line
-1× 4AN Adaptor - M12×1.25
-Straight & 45 degree 4AN Hose Ends & SS Braided PTFE hose
-Tee for Oil Pressure Sensor port, allowing standard sensor to be retained.
(if using an Oil Pressure Gauge, an adaptor fitting can be added to allow the extra sensor to be installed.): Link
Oil Drain / Return Hose
-90 & 45 Degree -10AN Hose Ends & SS Braided hose
-2 bolt Flange suits GT, and G series Turbos
-Weld-on Fitting for oil pan - Stainless Steel -10AN
Coolant Lines
-2x -6AN Adaptors - M14×1.5
-2x -6AN 90 degree Hose Ends
-Black Nylon-covered Braided hose with hex end finisher clamps.
Length of hose is long enough to connect into throttle body heater hose circuit (retaining throttle body heating) or trim them slightly to fit directly into the Heater Pipes instead.
INSTALLED PICS COMING SOON
